How to change dock position

I am trying to change dock position from one room to another room but robo is not recognising the new position and always looking dock to old position. Please help to change the same.

try to ask your question out side of this app like on YouTube or goggle. YouTube works great because they will show you how to if someone has posted it before  Goodluck. Mikeg

To move your DreameBot L20 Ultra dock to a new room, unplug the base station, relocate it, plug it back in, and use the "Relocate" function in the app to update its position on your map.
Follow these step-by-step instructions to ensure your robot does not get lost or delete your current map:
## 1. Relocate the Dock Physically

* Power off: Unplug the power cord from the wall outlet.
* Drain water: Empty the dirty water tank first to avoid spills during the move.
* Set up: Place the dock against a flat wall in the new room with 0.5 meters (1.6 ft) of clear space on both sides and 1.5 meters (4.9 ft) of open space in front.
* Power on: Plug the station back into the wall outlet.

## 2. Update the Location in the App

* Place the robot: Put your DreameBot L20 Ultra directly inside the base station.
* Open the app: Open your Dreamehome app and select your vacuum.
* Trigger relocation: Tap the More Options (three dots) menu icon.
* Select Map Management: Go into your current map settings.
* Click Relocate: Choose the Relocate / Reposition option. The robot will briefly back out of the dock, spin to scan the new room features, recognize its new surroundings, and automatically update the dock icon location on your existing map.

## 3. Alternative: Create a Remap (If Relocation Fails)
If the new room looks too similar to the old one or if the robot displays a positioning error, you will need to perform a quick remap.

* Keep your map: Do not manually delete your current map.
* Start Fast Mapping: In the app, select Map Management and click Create New Map or Fast Mapping.
* Let it run: The robot will quickly drive through the house without cleaning to drop a new dock pin and perfectly align all your room boundaries.

If you encounter an issue, what error message or behavior are you seeing in the app? I can also help you look into how to move it to a completely different floor if you are setting up multi-floor cleaning!

I found it gor you hope this helps