OL162953

Loud noise

Is this loud noise normal? I don’t remember this loud noise before?

This post contains more resources.

You need to log in to download or view. No account? Register

×
You need to log in to reply. Login | Register

5 Comment

Ocean breeze 1 Floor
Yes it's okay just double check if it's in turbo mode or something
2025-11-12 17:33:25 US Translate

Hi,
"1. Check whether the suction is set to high suction in the APP. As the suction increases, the working sound will also increase.
2. If the carpet boost mode is turned on, the machine will automatically increase the suction after recognizing the carpet, and the working sound will also increase.
3. The fan will start working when the machine is backwashing, and the sound will also increase.
4. If there is an abnormal sound during operation, please remove the side brush, roller brush cover and roller brush or rag plate at the bottom of the machine, start the machine and observe. If the working sound returns to normal
① Install the side brush first, start the machine, if there is an abnormal sound during operation, check whether the side brush is deformed.
② If the side brush works normally after installation: the rubber strip of the roller brush cover of the new machine moves against the floor and produces friction. You can persist in using it for a few times to observe.
③ If there is an abnormal sound after installing the roller brush, please remove the roller brush and check whether the two ends of the roller brush are entangled. When installing the cover, pay attention to the four sides being in place.
-------------------
If the working sound does not return to normal after removing the side brush, main brush, main brush cover and mop
①After turning off the machine, press down on both sides of the drive wheel and slide the drive wheel at the same time to check whether it can rotate and whether it can rebound after releasing it, and clean it.
②Turn the universal wheel to check whether it is smooth. If it is not smooth, please clean it.
③If the filter component is washed with water, make sure it is completely dry before use. The undried filter component will cause abnormal noise when the robot is working. "

2025-11-13 10:06:52 US Translate

OL162953 3 Floor Thread Starter
Thank you! I will do that! Excellent advice!
2025-11-23 15:59:17 US Translate

OL162953 4 Floor Thread Starter
I was wondering with all the new technology and innovation if Dreame can offer some kinds of buyback the old devices a credit us for buying a newer model like how apple does with their old phones and devices?!!! It would be soooo great Bcs I would love to have a newer model every couple of years and don’t mind an extra few dollars to replace my original investment!!!  Do you think it is something that could be discussed and or explore the possibilities?
2025-11-23 16:06:41 US Translate

Hi,
We have relayed your request to the relevant departments. Thank you for your understanding and cooperation.
 
2025-11-26 07:36 US Translate
UID:OL162953 US
  • 4Posts
  • 0Friends
cookie policy|Terms & Conditions|Privacy Policy

© 2025 Dreame Forum All Rights Reserved | Support by Discuz! X5.0 Font by MiSans

Quick Reply Back to Top Return to List