iitstristann

[L60 Ultra PE] Charge Doesn’t Increase

I purchased the L60 Ultra PE about two months ago now and have enjoyed its performance up until a few weeks ago. I believe some sort of software update had been released and—as a result—my L60 had a full 90% charge, ran out of juice to finish the full home run, and started to charge. The next day, I noticed the scheduled cleaning did not happen. I open the app and notice that the charge is still sitting at 9 or 10% despite hearing “Start charging!” and seeing the lightning bolt icon on the battery. This is frustrating as the performance was up to my standards, and now I can’t even use the product.

I have had multiple instances of this issue. The base is connected to the wall, not a power strip. Everything is wiped down and blemish-free. The only way I’ve gotten around this is to unplug the base, shut the robot down, wait a few minutes, plug in base, turn on robot, dock robot, and SOMETIMES this works. There is something in the software preventing the charging as I’ve gotten it to recharge with no issues for several days!…Until the issue reappears.

This post contains more resources.

You need to log in to download or view. No account? Register

×
You need to log in to reply. Login | Register

3 Comment

QQ002711 1 Floor
I have the same issue. I reset my robot to factory settings and you can find the instructions in the book. I also found that you can press and hold the dock button for 20 seconds till all the lights turn off and it puts the robot in a charge only mode shuts everything else off so it just focuses on recharging. When you get ready to use it, you press and hold the start button until all the lights come back on.
2026-11-1 13:31:48 US Translate

DS556706 2 Floor
Hi, i have the same problem, how do you solve?
2026-11-17 16:24:10 US Translate

To help resolve this, please follow the step-by-step troubleshooting guide below:  

1. First, please confirm whether the base station is powered on normally. Check whether the rocker switch on the back of the base station is turned on and make sure that the indicator light of the base station is on normally.
2. Next, please check whether the adapter plug is loose or damaged. Re-insert the adapter. If the adapter is damaged, it is recommended to replace a spare adapter to charge the robot.
3. Please wipe the charging shrapnel on the charging base to ensure that the charging shrapnel can rebound normally. At the same time, also wipe the charging contact piece on the robot. Place the robot correctly in the base station for charging, charge for 2 to 3 hours, and observe the power information in the APP to see if it can charge normally.
4.Confirm whether the robot is placed upside down. If so, guide the user to correctly position the robot inside the charging station for charging.

If the problem persists after completing the above troubleshooting steps, please do not hesitate to contact us again.
2026-11-18 04:37:40 US Translate

UID:MV584278 US
  • 1Posts
  • 0Friends

© 2026 Dreame Forum All Rights Reserved | Support by Discuz! X5.0 Font by MiSans

Quick Reply Back to Top Return to List