UJ494940

[X50 Ultra] Mops

I have problems with the mops, they come off every time cleans

This post contains more resources.

You need to log in to download or view. No account? Register

×
You need to log in to reply. Login | Register

3 Comment

NC842135 1 Floor
Same here and their customer service is absolutely awful
2026-11-17 23:54:39 US Translate

This is the second issue with this vacuum
2026-11-18 10:09 US Translate
Please refer to the following troubleshooting guide:

1. Check Base Station Wash Board
Confirm the wash board in the base station is properly installed.
2. Replace Mop Pad
If the mop pad has been used for a long time, we recommend replacing it with a new one to see if the issue improves.
3. Check Mop Pad Holder Magnet
a.If the problem persists after replacing the mop pad, check if the magnets on the mop pad holder are functioning normally
b.Try swapping the left and right mop pads for testing
c.Confirm you are using genuine mop pads
d.If the magnets are rusty or have abnormal magnetism, you need to replace a new mop pad holder
4. Device Restart and Reinstallation
Remove the robot from the base station, detach the mop pad holders, then manually restart the robot
After the robot restarts and returns to normal, reinstall the mop pad holders
If the problem persists after completing these steps, please reply to this email with specific details.
2026-11-18 04:36:47 US Translate

UID:UJ494940 US
  • 12Posts
  • 0Friends

© 2026 Dreame Forum All Rights Reserved | Support by Discuz! X5.0 Font by MiSans

Quick Reply Back to Top Return to List