A3 AWD Pro 3500 Feedback

Just wanted to give some initial feedback about this mower having used a few other brands.

1. Please allow the "EdgeMaster" setting to be changed from 3cm.  Some customers may not want 3cm cut height around the edge but something higher.
I cut my lawn at 7.5cm but would like the edge at 6cm.

2. Allow for multiple edge laps currently the mower only does one edge lap after the yard is complete.  Other machines allow the user to select how many edge laps to do 1-5. Also the user can decide if they want to mow the edge first or after the yard mowing is complete.

3. Add more patterns in the mowing direction.  I have seen some with spiral patterns and checkerboard patterns.  While currently to do checkerboard you would just have to mow twice some machines will just have a setting for that.

4. Add scheduling to allow for every other day, every two days or every three days between mowing.

5. Allow differenece zones to have difference mowing settings.  Zone 1 can have one setting while zone 2 can have a different setting.  That way if All-area is selected to cut all the zones can be cut in their own mowing settings.

Finally some issues I experienced with the setup of the mower.
When I initially set it up the mower had a difficult time connecting to bluetooth.  It would constantly connect and disconnect while walking it around the yard even though I was only around 5ft behind it.  I had to use the manual mapping method because in the auto mapping method the mower would drive over a walking path thinking is was grass.
Also when I initially tried EdgeMaster setting the blades were clogging with grass, so I was constently getting error messages.  When I ended the task and restarted cutting the blades were stuck at the 3cm height and would not return to the normal height setting of 7.5cm.  In order to fix it I had to completely power down the mower and restart it.
I have also had many issues were the app would say "Put in the code to resume" but the mower would not show the code screen.

I hope this will give some good feedback to improve your product.