Check to make sure the base is getting AC power from the power cord (light on base should be on.) I had a similar problem. Everything looked okay but it was not getting power. Also try redocking the vacuum using the app. It is sometimes difficult to place it in the dock manually and get the vacuum to charge (my experience.)
We sincerely apologize for any inconvenience caused.
To troubleshoot the issue, please follow these steps:
1. Confirm that the charging dock/base station is connected to power. Ensure that both ends of the power cord are correctly plugged in.
2. Check the power indicator: it should flash white while charging and turn solid white when fully charged. Once fully charged, restart the robot and check if it functions properly.
3. Clean the charging contacts on both the charging base and the robot to ensure good contact during charging.For further information, please refer to the article:<a href="https://support.dreametech.com/hc/en-us/articles/10385329318671-How-to-Solve-Charging-Woes-A-Friendly-Guide-for-Your-Robot-Pal"> How to solve charging problem?
If the problem persists, please feel free to contact us（support.na@dreame.tech） again.Thank you for your understanding.
