[X50 Ultra] Not cleaning
Vacuum is not picking up debris that should be very easy to pickup.  Highly disappointed.  If product doesn't improve will likely return
Attachment: You need to log in to download or view attachments. No account? Register
Posted 2025-8-28 08:23:05 Translate
US 2902
Latest
Youngsumai
Just got mine today and I feel the same smh ima give it a few days
Hi,

You can refer to my reply below to check the cleaning route and suction settings. Also check if the sensor is dirty. I hope this helps.
Translate
YB384264
Post a screenshot from the app after it ran showing the cleanup route. Did you use clean genius or a manual run? What are your vacuum settings set as?
Hi,

Please try this :

1. Wipe the edge sensor on the right side of the robot with a soft, dry cloth.
2.  Ensure the edge sensor is not blocked by any obstacles or objects.
3. Check that the robot can properly clean the edges.
4. You can check the cleaning route in the APP to see if there is anything missed, or check the suction setting of the machine.
5. If the problem persists, please feel free to contact support.na@dreame.tech again.

We hope the above information is helpful to you.
LL792417
Could be because you are wearing crocs.
QA693061
I have the same situation as your “ Vacuum is not picking up debris that should be very easy to pickup.  Highly disappointed.  If product doesn't improve will likely return” I spend a lot money but not worthies
XY100820
Just set up today and it doesn’t go under my furniture! My roomba did! That’s important to me. Probably will return ugh!
TY924661
Mine was having problems picking up and then we cleaned out all the suction area and it worked a lot better! I have two dogs and a cat, and there was a lot of hair stuck in it!
TY924661
Works great, now!
FT167587
Device not suction in dirt with auto suction. This product is terrible. It misses a lot of areas.
12Next Page
Login to comment...
0
12
Cancel